Sample code uses ES6 language features such as arrow functions and promises. For compatibility with IE11, code written with these features must be either transpiled using tools like Babel or refactored accordingly using callbacks.
Introduction
Each lawyer in Belgium registered at the balie is obliged since 1/1/2018 to have an electronic lawyer card. This is declared in atr. 193bis of the Codex Deontologie voor Advocaten :
“De advocaat moet voor zijn identificatie en voor de authenticatie beschikken over de elektronische CCBE-advocatenkaart.”
More info at https://www.diplad.be/en-GB/t/23/elektronische-advocatenkaart.aspx .
Interface
Module
Copy export interface AbstractEidDiplad {
allData(filters: string[] | Options, callback?: (error: T1CLibException, data: TokenAllDataResponse) => void): Promise<TokenAllDataResponse>;
allCerts(parseCerts?: boolean, filters?: string[] | Options, callback?: (error: T1CLibException, data: TokenAllCertsResponse) => void): Promise<TokenAllCertsResponse>;
biometric(callback?: (error: T1CLibException, data: TokenBiometricDataResponse) => void): Promise<TokenBiometricDataResponse>;
tokenData ( callback ?: (error : T1CLibException , data : TokenDataResponse ) => void ) : Promise < TokenDataResponse >;
address ( callback ?: (error : T1CLibException , data : TokenAddressResponse ) => void ) : Promise < TokenAddressResponse >;
picture ( callback ?: (error : T1CLibException , data : TokenPictureResponse ) => void ) : Promise < TokenPictureResponse >;
rootCertificate(parseCerts?: boolean, callback?: (error: T1CLibException, data: TokenCertificateResponse) => void): Promise<TokenCertificateResponse>;
intermediateCertificates(parseCerts?: boolean, callback?: (error: T1CLibException, data: TokenCertificateResponse) => void): Promise<TokenCertificateResponse>;
authenticationCertificate(parseCerts?: boolean, callback?: (error: T1CLibException, data: TokenCertificateResponse) => void): Promise<TokenCertificateResponse>;
nonRepudiationCertificate(parseCerts?: boolean, callback?: (error: T1CLibException, data: TokenCertificateResponse) => void): Promise<TokenCertificateResponse>;
encryptionCertificate(parseCerts?: boolean, callback?: (error: T1CLibException, data: TokenCertificateResponse) => void): Promise<TokenCertificateResponse>;
verifyPin(body: TokenVerifyPinData, callback?: (error: T1CLibException, data: TokenVerifyPinResponse) => void): Promise<TokenVerifyPinResponse>;
authenticate(body: TokenAuthenticateOrSignData, callback?: (error: T1CLibException, data: TokenAuthenticateResponse) => void): Promise<TokenAuthenticateResponse>;
sign(body: TokenAuthenticateOrSignData, bulk?: boolean, callback?: (error: T1CLibException, data: TokenSignResponse) => void): Promise<TokenSignResponse>;
allAlgoRefs(callback?: (error: T1CLibException, data: TokenAlgorithmReferencesResponse) => void): Promise<TokenAlgorithmReferencesResponse>
resetBulkPin ( callback ?: (error : T1CLibException , data : BoolDataResponse ) => void ) : Promise < BoolDataResponse >;
} Models
All model information can be found in the Token typings model page
Examples
Initializing Diplad Module
Copy T1cSdk .initialize (config) .then (res => {
const diplad = res . client .createEidDiplad (readerId);
} , err => {
console .error (error)
}); All Data
Copy diplad .allData () .then (res => {
} , err => {
console .log (err);
} Response will look like:
Copy {
"data" : {
"biometric" : {
"cardNumber" : "cardNumber" ,
"cardValidityDateEnd" : "2021-01-08" ,
"chipNumber" : "c57c0a3f-d034-46c9-831e-a208b2e44fb6" ,
"firstNames" : "Tom" ,
"name" : "Van Cammen" ,
"nationality" : "BE" ,
"rawData" : "BASE64_ENCODED_CARD_DATA" ,
"version" : "1" ,
"issuer" : ""
} ,
"picture" : {
"picture" : "BASE64_ENCODED_BYTE_ARRAY"
}
} ,
"success" : true
} Biometric Data
Copy diplad .biometric () .then (res => {
} , err => {
console .log (err);
} Response will look like:
Copy {
"data" : {
"cardNumber" : "cardNumber" ,
"cardValidityDateEnd" : "2021-01-08" ,
"chipNumber" : "c57c0a3f-d034-46c9-831e-a208b2e44fb6" ,
"firstNames" : "Tom" ,
"name" : "Van Cammen" ,
"nationality" : "BE" ,
"rawData" : "BASE64_ENCODED_CARD_DATA" ,
"version" : "1" ,
"issuer" : ""
} ,
"success" : true
} Picture
Copy diplad .picture () .then (res => {
} , err => {
console .log (err);
} Response will look like:
Copy {
"data" : {
"picture" : "BASE64_ENCODED_BYTE_ARRAY"
} ,
"success" : true
} All Certificates
When additional parsing of the certificate is needed you can add a boolean to indicate if you want to parse the certificate or not.
Copy const filter = [ 'rootCertificate' , 'authenticationCertificate' , 'nonRepudiationCertificate' ];
diplad .allCerts (parseCertsBoolean , filter) .then (res => {
} , err => {
console .log (err);
} Response will look like:
Copy {
success : true ,
data : {
authenticationCertificate ?: {
certificate? : string ,
certificates? : Array < string > ,
certificateType? : string ,
id? : string ,
parsedCertificate? : Certificate ,
parsedCertificates? : Array < Certificate >
} ,
nonRepudiationCertificate ?: {
certificate? : string ,
certificates? : Array < string > ,
certificateType? : string ,
id? : string ,
parsedCertificate? : Certificate ,
parsedCertificates? : Array < Certificate >
} ,
rootCertificate ?: {
certificate? : string ,
certificates? : Array < string > ,
certificateType? : string ,
id? : string ,
parsedCertificate? : Certificate ,
parsedCertificates? : Array < Certificate >
} ,
}
} Root Certificate
When additional parsing of the certificate is needed you can add a boolean to indicate if you want to parse the certificate or not.
Copy diplad .rootCertificate (parseCertsBoolean) .then (res => {
} , err => {
console .log (err);
} Response will look like:
Copy {
success : true ,
data : {
certificate ?: string ,
certificates ?: Array < string > ,
certificateType ?: string ,
id ?: string ,
parsedCertificate ?: Certificate ,
parsedCertificates ?: Array < Certificate >
}
} Authentication Certificate
When additional parsing of the certificate is needed you can add a boolean to indicate if you want to parse the certificate or not.
Copy diplad .authenticationCertificate (parseCertsBoolean) .then (res => {
} , err => {
console .log (err);
} Response will look like:
Copy {
success : true ,
data : {
certificate ?: string ,
certificates ?: Array < string > ,
certificateType ?: string ,
id ?: string ,
parsedCertificate ?: Certificate ,
parsedCertificates ?: Array < Certificate >
}
} Non-Repudiation Certificate
When additional parsing of the certificate is needed you can add a boolean to indicate if you want to parse the certificate or not.
Copy diplad .nonRepudiationCertificate (parseCertsBoolean) .then (res => {
} , err => {
console .log (err);
} Response will look like:
Copy {
success : true ,
data : {
certificate ?: string ,
certificates ?: Array < string > ,
certificateType ?: string ,
id ?: string ,
parsedCertificate ?: Certificate ,
parsedCertificates ?: Array < Certificate >
}
} Verify PIN
If the card reader has a PIN pad, the PIN must always be entered via the card-reader PIN pad.
If the card reader has no PIN pad:
If the osDialog property is set to true, a OS dialog window will be displayed for the user the enter their PIN
If the pin property is defined, that value is used
If osDialog is set to false, and pin is undefined, an error will be returned
Copy const data = {
pin : "1234" , // optional
osDialog : true // optional
}
diplad .verifyPin (data) .then (res => {
} , err => {
console .error (err)
}) Response will look like:
Copy {
"success" : true ,
"data" : {
"verified" : true
}
} Sign
To sign data, an algorithm must be specified in the algorithm property (see Supported Algorithms ), and a Base64-encoded string representation of the digest bytes of the same algorithm in the data property.
Additionally, it is possible to bulk sign data without having to re-enter the PIN by adding an optional bulk parameter set to true to the request. Subsequent sign requests will not require the PIN to be re-entered until a request with bulk being set to false is sent, or the Bulk PIN Reset method is called.
When using bulk signing, great care must be taken to validate that the first signature request was successful prior to sending subsequent requests. Failing to do this will likely result in the card being blocked.
The PIN can provided/entered in the same way as Verify PIN
Copy const data = {
algorithm : "sha256" ,
data : "E1uHACbPvhLew0gGmBH83lvtKIAKxU2/RezfBOsT6Vs=" ,
pin : "1234"
}
const bulk = false ;
diplad .sign (data , bulk) .then (res => {
} , err => {
console .error (err)
}) Response will look like:
Copy {
"success" : true ,
"data" : {
"data" : "..."
}
} Authenticate
To sign data, an algorithm must be specified in the algorithm property (see Supported Algorithms), and a Base64-encoded string representation of the digest bytes of the same algorithm in the data property.
The PIN can provided/entered in the same way as Verify PIN
Copy const data = {
algorithm : "sha256" ,
data : "E1uHACbPvhLew0gGmBH83lvtKIAKxU2/RezfBOsT6Vs=" ,
pin : "1234"
}
diplad .authenticate (data) .then (res => {
} , err => {
console .error (err)
}) Response will look like:
Copy {
"success" : true ,
"data" : {
"data" : "..."
}
} Get Supported Algorithms
Copy diplad .allAlgoRefs () .then (res => {
} , err => {
console .error (err)
}) Response will look like:
Copy {
"success" : true ,
"data" : {
"ref" : [ "sha1" , "sha256" , "sha512" ]
}
} Bulk PIN Reset
The PIN set for bulk signing can be reset by calling this method.
Copy diplad .resetBulkPin () .then (res => {
} , err => {
console .error (err)
}) Response will look like:
Copy {
"success" : true ,
"data" : true
}