Generic token

Sample code uses ES6 language features such as arrow functions and promises. For compatibility with IE11, code written with these features must be either transpiled using tools like Babel or refactored accordingly using callbacks.

Introduction

The Generic token interface is an interface used to integrate all supported tokens. This interface relies on the fact that you will need to provide a valid module. The module suggested from the reader response can be used here.

Interface

export interface AbstractEidGeneric {
  getModuleDescription(module: string, callback?: (error: T1CLibException, data: DataObjectResponse) => void): Promise<DataObjectResponse>;
  allData(module: string, filters?: string[] | Options, callback?: (error: T1CLibException, data: TokenAllDataResponse) => void): Promise<TokenAllDataResponse>;
  allCerts(module: string, parseCerts?: boolean,  filters?: string[] | Options, callback?: (error: T1CLibException, data: TokenAllCertsResponse) => void): Promise<TokenAllCertsResponse>;
  biometric(module: string, callback?: (error: T1CLibException, data: TokenBiometricDataResponse) => void): Promise<TokenBiometricDataResponse>;
  tokenData(module: string, callback?: (error: T1CLibException, data: TokenDataResponse) => void): Promise<TokenDataResponse>;
  address(module: string, callback?: (error: T1CLibException, data: TokenAddressResponse) => void): Promise<TokenAddressResponse>;
  picture(module: string, callback?: (error: T1CLibException, data: TokenPictureResponse) => void): Promise<TokenPictureResponse>;
  rootCertificate(module: string, parseCerts?: boolean,  callback?: (error: T1CLibException, data: TokenCertificateResponse) => void): Promise<TokenCertificateResponse>;
  intermediateCertificates(module: string, parseCerts?: boolean,  callback?: (error: T1CLibException, data: TokenCertificateResponse) => void): Promise<TokenCertificateResponse>;
  authenticationCertificate(module: string, parseCerts?: boolean,  callback?: (error: T1CLibException, data: TokenCertificateResponse) => void): Promise<TokenCertificateResponse>;
  nonRepudiationCertificate(module: string, parseCerts?: boolean,  callback?: (error: T1CLibException, data: TokenCertificateResponse) => void): Promise<TokenCertificateResponse>;
  encryptionCertificate(module: string, parseCerts?: boolean,  callback?: (error: T1CLibException, data: TokenCertificateResponse) => void): Promise<TokenCertificateResponse>;
  verifyPin(module: string, body: TokenVerifyPinData, callback?: (error: T1CLibException, data: TokenVerifyPinResponse) => void): Promise<TokenVerifyPinResponse>;
  authenticate(module: string, body: TokenAuthenticateOrSignData, callback?: (error: T1CLibException, data: TokenAuthenticateResponse) => void): Promise<TokenAuthenticateResponse>;
  sign(module: string, body: TokenAuthenticateOrSignData, bulk?: boolean, callback?: (error: T1CLibException, data: TokenSignResponse) => void): Promise<TokenSignResponse>;
  allAlgoRefs(module: string, callback?: (error: T1CLibException, data: TokenAlgorithmReferencesResponse) => void): Promise<TokenAlgorithmReferencesResponse>
  resetBulkPin(module: string, callback?: (error: T1CLibException, data: BoolDataResponse) => void): Promise<BoolDataResponse>;
}

Models

All model information can be found in the Token typings model page

Initialise the Trust1Connector JS

Initialise a Trust1Connector client with a valid configuration:

T1CSdk.T1CClient.initialize(config).then(res => {
    client = res;
}, err => {
    console.error(error)
});

Obtain the Reader information

In order to get all connected card-readers, with available cards:

var core = client.core();
core.readersCardAvailable(callback);

This function call returns:

{
  "data": [
    {
      "card": {
        "atr": "3B9813400AA503010101AD1311",
        "description": ["Belgian eID Card"]
      },
      "id": "57a3e2e71c48cee9",
      "name": "Bit4id miniLector",
      "pinpad": false,
      "suggestedModule": "beid"
    }
  ],
  "success": true
}

As you can see in the response we get a property suggestedModule which is returned based on the card, reader and AID information. This suggested module can be used in the generic interface.

Using the generic interface can be done as follows;

var generic = client.generic(selected_reader.id, pin, pinType);

The pin and pinType are optional and are used for unlocking the pace layer (if the card is protected with a pace layer).

At this point for each use-case you will need to provide the module. This can be manually defined or be retrieved from the suggestedModule property in the reader-response. In the examples below we provide the module as a variable module

Cardholder Information

The card holder is the person identified using the Belgian eID card. It's important to note that all data must be validated in your backend. Data validation can be done using the appropriate certificate (public key).

Biometric data

Contains all card holder related data, excluding the card holder address and photo. The service can be called:

generic.biometric(module, options, callback);

An example callback:

function callback(err,data) {
    if(err){
        console.log("Error:",JSON.stringify(err, null, '  '));
    }
    else {
        console.log(JSON.stringify(data, null, '  '));
    }
}

Response:

{
 "birthDate": "15 JUL  1993",
 "birthLocation": "Roeselare",
 "cardDeliveryMunicipality": "Avelgem",
 "cardNumber": "592..8233",
 "cardValidityDateBegin": "27.05.2015",
 "cardValidityDateEnd": "27.05.2025",
 "chipNumber": "U0xHk...EstwAjEpJQQg==",
 "documentType": "01",
 "firstNames": "Gilles Frans",
 "name": "Platteeuw",
 "nationalNumber": "930...154",
 "nationality": "Belg",
 "nobleCondition": "",
 "pictureHash": "Fqva9YCp...JKyn8=",
 "rawData": "AQw1OTIxMjQwNTgy...TARFBar2vWAqTW+axEIuyskBgFySsp/",
 "sex": "M",
 "signature": "hKys9WMjUm4ipg...14xUCg/98Y9/gP/vgG7JTRZJoKgDXLLTvLZO4qlfA==",
 "specialStatus": "0",
 "thirdName": "J",
 "version": "0"
}

Address

Contains the card holder's address. The service can be called:

generic.address(module, callback);

Response:

{
 "municipality": "Hoeselt",
 "rawData": "ARJLZXJrc...AAAAAA==",
 "signature": "mhPyeRg25H...w==",
 "streetAndNumber": "Kerkstraat X",
 "version": "0",
 "zipcode": "3730"
}

Picture

Contains the card holder's picture stored on the smart card. The service can be called:

generic.picture(module, callback);

Response:

{
  "data": "/9j/4AAQSkZJRgABA...59aVpcklSDzyKUTEDGK//9k=",
  "success": true
}

Token info

The token info contains generic information about the card and it's capabilities. This information includes the serial number, file types for object directory files, algorithms implemented on the card, etc.

Response

{
  "data": {
    "eid_compliant":48,
    "electrical_perso_interface_version":0,
    "electrical_perso_version":3,
    "graphical_perso_version":7,
    "label":"BELPIC",
    "prn_generation":4,
    "raw_data":"MCcCAQAEEFNMSU4z...JFTFBJQwMCBDCeBAcDAAA=",
    "serial_number":"534C494E..1231C",
    "version":0,
    "version_rfu":0
    },
    "success": true
}

Certificates

Exposes all the certificates publicly available on the smart card.

Root Certificate

Contains the 'root certificate' stored on the smart card. The root certificate is used to sign the 'citizen CA certificate'. When additional parsing of the certificate is needed you can add a boolean to indicate if you want to parse the certificate or not. The service can be called:

generic.rootCertificate(module, parseCertsBoolean, callback);

Response:

{
 "certificate": "MIIFjjCCA3agAwIBAgIIO...xg==",
 "parsedCertificate": {...}
}

Authentication Certificate

Contains the 'authentication certificate' stored on the smart card. The 'authentication certificate' contains the public key corresponding to the private RSA authentication key. The 'authentication certificate' is needed for pin validation and authentication. When additional parsing of the certificate is needed you can add a boolean to indicate if you want to parse the certificate or not The service can be called:

generic.authenticationCertificate(module, parseCertsBoolean, callback);

Response:

{
 "certificate": "MIIFjjCCA3agAwIBAgIIO...xg==",
  "parsedCertificate": {...}
}

Intermediate Certificate (citizen)

Contains the citizen certificate stored on the smart card. The 'citizen certificate' is used to sign the 'authentication certificate' and the 'non-repudiation certificate'. When additional parsing of the certificate is needed you can add a boolean to indicate if you want to parse the certificate or not The service can be called:

generic.intermediateCertificates(module, parseCertsBoolean, callback);

Response:

{
 "certificate": "MIIFjjCCA3agAwIBAgIIO...xg==",
  "parsedCertificate": {...}
}

Non-repudiation Certificate

Contains the 'non-repudiation certificate' stored on the smart card. The 'non-repudiation certificate' contains the public key corresponding the private RSA non-repudiation key. When additional parsing of the certificate is needed you can add a boolean to indicate if you want to parse the certificate or not The service can be called:

generic.nonRepudiationCertificate(module, parseCertsBoolean, callback);

Response:

{
 "certificate": "MIIFjjCCA3agAwIBAgIIO...xg==",
  "parsedCertificate": {...}
}

Encryption Certificate (RRN)

Contains the 'encryption certificate' stored on the smart card. The 'encryption certificate' corresponds to the private key used to sign the 'biometric' and 'Address' data. When additional parsing of the certificate is needed you can add a boolean to indicate if you want to parse the certificate or not The service can be called:

generic.encryptionCertificate(module, parseCertsBoolean, callback);

Response:

{
 "certificate": "MIIFjjCCA3agAwIBAgIIO...xg==",
  "parsedCertificate": {...}
}

Data Filter

Filter Card Holder Data

All data on the smart card can be dumped at once, or using a filter. In order to read all data at once:

var filter = [];
generic.allData(module, { filters: filter}, callback);

Response:

{
 "picture": {
  "picture": "/9j/4AAQSkZJRgABAgEBLAEsAAD/...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"
 },
 "biometric": {
  "birthDate": "15 JUL  1993",
  "birthLocation": "Roeselare",
  "cardDeliveryMunicipality": "Avelgem",
  "cardNumber": "592124058233",
  "cardValidityDateBegin": "27.05.2015",
  "cardValidityDateEnd": "27.05.2025",
  "chipNumber": "...==",
  "documentType": "01",
  "firstNames": "Gilles Frans",
  "name": "Platteeuw",
  "nationalNumber": "...",
  "nationality": "Belg",
  "nobleCondition": "",
  "pictureHash": "...=",
  "rawData": "...+axEIuyskBgFySsp/",
  "sex": "M",
  "signature": ".../OlA44h4YCM/h+J14xUCg/98Y9/.../C/RB2dtVbHwFvDuafmr4ZEshTlZTLidHKlISFvFWOtsLAEPCbl5LjfQwcOKe0pDADtHb4IStBnr+aaE8oHsTaKq66Y+zt+AbwdmWOrMA5URKKf7dZkY7jt3h8KZDw36VjcytUgjxVIdqwHsDkmIjK6mJtakIwybS5wn3RiQj33/vgG7JTRZJoKgDXLLTvLZO4qlfA==",
  "specialStatus": "0",
  "thirdName": "J",
  "version": "0"
 },
 "address": {
  "municipality": "Hoeselt",
  "rawData": "...==",
  "signature": "...+Evety1PnTE4pqXaHgBxIpk+P8kRL5W3zDV+../../..+YoHBC9KqTmSpl5KULxdnKiyCt+2RyJdzE2wyoymjRmysIhJy1wW9PRnx99S1TFqQLuc0tyBmkBPR4aFqmOq4a7zqd0q2Q1g+BbnwJ4d3oa10ia5+0kBXf0THoXv3HYIHlnwhBMfAtWzPnFrYBuAKTwyl7yBF5IFfXFpGWuVZUTJElgNcmNvsHMnAhVwDw==",
  "streetAndNumber": "Kerkstraat X",
  "version": "0",
  "zipcode": "3730"
 }
}

The filter can be used to ask a list of custom data containers. For example, we want to read only the biometric data

var filter = ['biometric'];
generic.allData(module, { filters: filter }, callback);

Response:

{
 "biometric": {
  "birthDate": "15 JUL  1993",
  "birthLocation": "Roeselare",
  "cardDeliveryMunicipality": "Avelgem",
  "cardNumber": "592124058233",
  "cardValidityDateBegin": "27.05.2015",
  "cardValidityDateEnd": "27.05.2025",
  "chipNumber": "...==",
  "documentType": "01",
  "firstNames": "Gilles Frans",
  "name": "Platteeuw",
  "nationalNumber": "...",
  "nationality": "Belg",
  "nobleCondition": "",
  "pictureHash": "...=",
  "rawData": "...+axEIuyskBgFySsp/",
  "sex": "M",
  "signature": ".../OlA44h4YCM/h+J14xUCg/98Y9/.../C/RB2dtVbHwFvDuafmr4ZEshTlZTLidHKlISFvFWOtsLAEPCbl5LjfQwcOKe0pDADtHb4IStBnr+aaE8oHsTaKq66Y+zt+AbwdmWOrMA5URKKf7dZkY7jt3h8KZDw36VjcytUgjxVIdqwHsDkmIjK6mJtakIwybS5wn3RiQj33/vgG7JTRZJoKgDXLLTvLZO4qlfA==",
  "specialStatus": "0",
  "thirdName": "J",
  "version": "0"
 }
}

Filter Certificates

All certificates on the smart card can be dumped at once, or using a filter. In order to read all certificates at once:

var filter = [];
generic.allCerts(module, parseCerts, { filters: filter}, callback);

Response:

{
 "rootCertificate": {
  "certificate": "..."
 },
 "authenticationCertificate": {
  "certificate": "..."
 },
 "nonRepudiationCertificate": {
  "certificate": "..."
 },
 "intermediateCertificates": {
  "certificate": "..."
 },
 "encryptionCertificate": {
  "certificate": "..."
 }
}

The filter can be used to ask a list of custom data containers. For example, we want to read only the rootCertificate

var filter = ['rootCertificate'];
generic.allCerts(module, { filters: filter}, callback);

Response:

{
 "rootCertificate": {
  "certificate": "..."
 }
}

Sign Data

Data can be signed using the Belgian eID smart card. To do so, the T1C-GCL facilitates in:

Retrieving the certificate chain (citizen-certificate, root-certificate and non-repudiation certificate)
Perform a sign operation (private key stays on the smart card)
Return the signed hash

To get the certificates necessary for signature validation in your back-end:

var filter = null;
generic.allCerts(module, { filters: filter}, callback);

Response:

{
 "rootCertificate": {
  "certificate": "..."
 },
 "authenticationCertificate": {
  "certificate": "..."
 },
 "nonRepudiationCertificate": {
  "certificate": "..."
 },
 "intermediateCertificates": {
  "certificate": "..."
 },
 "encryptionCertificate": {
  "certificate": "..."
 }
}

Depending on the connected smart card reader. A sign can be executed in 2 modes:

Using a connected card reader with 'pin-pad' capabilities (keypad and display available)
Using a connected card reader without 'pin-pad' capabilities (no keypad nor display available)

Security consideration: In order to sign a hash, security considerations prefer using a 'pin-pad'.

Sign Hash without pin-pad

When the web or native application is responsible for showing the password input, the following request is used to sign a given hash:

var data = {
      "pin":"...",
      "algorithmReference":"sha1",
      "data":"I2e+u/sgy7fYgh+DWA0p2jzXQ7E=",
      "osDialog": true
}
generic.sign(module, data, callback);

Response is a base64 encoded signed hash:

{
  "success": true,
  "data": "W7wqvWA8m9SBALZPxN0qUCZfB1O/WLaM/silenLzSXXmeR+0nzB7hXC/Lc/fMru82m/AAqCuGTYMPKcIpQG6MtZ/SGVpZUA/71jv3D9CatmGYGZc52cpcb7cqOVT7EmhrMtwo/jyUbi/Dy5c8G05owkbgx6QxnLEuTLkfoqsW9Q="
}

The 'authenticationreference' property can contain the following values: sha1, sha256, sha512, md5.

Sign Hash with pin-pad

When the pin entry is done on the pin-pad, the following request is used to sign a given hash:

var data = {
      "algorithmReference":"sha1",
      "data":"I2e+u/sgy7fYgh+DWA0p2jzXQ7E=",
      "osDialog": false
}
generic.sign(module, data, callback);

Response is a base64 encoded signed hash:

{
    "success": true,
    "data": "W7wqvWA8m9SBALZPxN0qUCZfB1O/WLaM/silenLzSXXmeR+0nzB7hXC/Lc/fMru82m/AAqCuGTYMPKcIpQG6MtZ/SGVpZUA/71jv3D9CatmGYGZc52cpcb7cqOVT7EmhrMtwo/jyUbi/Dy5c8G05owkbgx6QxnLEuTLkfoqsW9Q="
}

The 'algorithm_reference' property can contain the following values: sha1, sha256, sha512, md5.

The core services lists connected readers, and if they have pin-pad capability. You can find more information in the Core Service documentation on how to verify card reader capabilities.

Bulk Signing

It is possible to bulk sign data without having to re-enter the PIN by adding an optional bulk parameter set to true to the request. Subsequent sign requests will not require the PIN to be re-entered until a request with bulk being set to false is sent, or the Bulk Sign Reset method is called.

When using bulk signing, great care must be taken to validate that the first signature request was successful prior to sending subsequent requests. Failing to do this will likely result in the card being blocked.

const data = {
    algorithm: "sha256",
    data: "E1uHACbPvhLew0gGmBH83lvtKIAKxU2/RezfBOsT6Vs=",
    pin: "1234"
}
const bulk = true;
generic.sign(module, data, bulk).then(res => {
}, err => {
    console.error(err)
})

Bulk PIN Reset

The PIN set for bulk signing can be reset by calling this method.

generic.resetBulkPin(module).then(res => {
}, err => {
    console.error(err)
})

Response will look like:

{
    "success": true,
    "data": true
}

Verify PIN

Verify PIN without pin-pad

When the web or native application is responsible for showing the password input, the following request is used to verify a card holder PIN:

var data = {
      "pin":"..."
}
generic.verifyPin(module, data, callback);

Response:

{
  "verified": true
}

Verify PIN with pin-pad

When the pin entry is done on the pin-pad, the following request is used to verify a given PIN:

var data = {}
generic.verifyPin(module, data, callback);

Response:

{
  "verified": true
}

Authentication

The T1C-GCL is able to authenticate a card holder based on a challenge. The challenge can be:

provided by an external service
provided by the smart card An authentication can be interpreted as a signature use case, the challenge is signed data, that can be validated in a back-end process.
External Challenge
An external challenge is provided in the data property of the following example:

var data = {
  "pin": "...",
  "algorithm_reference": "sha1",
  "data":"I2e+u/sgy7fYgh+DWA0p2jzXQ7E="
}
generic.authenticate(module, data, callback);

Response:

{
"success": true,
"data": "W7wqvWA8m9SBALZPxN0qUCZfB1O/WLaM/silenLzSXXmeR+0nzB7hXC/Lc/fMru82m/AAqCuGTYMPKcIpQG6MtZ/SGVpZUA/71jv3D9CatmGYGZc52cpcb7cqOVT7EmhrMtwo/jyUbi/Dy5c8G05owkbgx6QxnLEuTLkfoqsW9Q="
}

Take notice that the PIN property can be omitted when using a smart card reader with pin-pad capabilities.

Get valid algorithms to use for Sign or Authenticate

Via the Trust1Connector modules you are able to retrieve available algorithms to use for Signing or Authenticate

generic.allAlgoRefs(module, callback);

The response you can expect is a list of algorithms, an example can be found below (the values below are purely examplatory)

{
    "success": true,
    "data": ["sha1", "sha256"]

PreviousToken typing models NextBelgian eID

Last updated 5 years ago

Was this helpful?

hashtagIntroduction

hashtagInterface

hashtagModels

hashtagInitialise the Trust1Connector JS

hashtagObtain the Reader information

hashtagCardholder Information

hashtagBiometric data

hashtagAddress

hashtagPicture

hashtagToken info

hashtagCertificates

hashtagRoot Certificate

hashtagAuthentication Certificate

hashtagIntermediate Certificate (citizen)

hashtagNon-repudiation Certificate

hashtagEncryption Certificate (RRN)

hashtagData Filter

hashtagFilter Card Holder Data

hashtagFilter Certificates

hashtagSign Data

hashtagSign Hash without pin-pad

hashtagSign Hash with pin-pad

hashtagBulk Signing

hashtagBulk PIN Reset

hashtagVerify PIN

hashtagVerify PIN without pin-pad

hashtagVerify PIN with pin-pad

hashtagAuthentication

hashtagGet valid algorithms to use for Sign or Authenticate

Introduction

Interface

Models

Initialise the Trust1Connector JS

Obtain the Reader information

Cardholder Information

Biometric data

Address

Picture

Token info

Certificates

Root Certificate

Authentication Certificate

Intermediate Certificate (citizen)

Non-repudiation Certificate

Encryption Certificate (RRN)

Data Filter

Filter Card Holder Data

Filter Certificates

Sign Data

Sign Hash without pin-pad

Sign Hash with pin-pad

Bulk Signing

Bulk PIN Reset

Verify PIN

Verify PIN without pin-pad

Verify PIN with pin-pad

Authentication

Get valid algorithms to use for Sign or Authenticate